Circuit breaker

ZUM1-63 100 225 400 630 800 1250 Moulded case circuit breaker

Note*: The neutral pole (N pole) of the four-level product is divided into four types of
A-type N-pole, no overcurrent tripping element is installed, and the N-pole is always on, not combined with other three-level;
B-type N-pole No overcurrent trip element is installed, and the N pole is combined with other three levels (N pole is closed first and then opened);
C-type N pole is installed with overcurrent trip element, and the N pole is combined with other three levels (N The pole is closed first and then opened);
D-type N pole is installed with an overcurrent trip element, and the N pole is always on, and does not open and close together with other three levels;

Detailed introduction

Main purpose and scope of application
ZUM1 series plastic case circuit breaker (hereinafter referred to as circuit breaker) is one of the new circuit breakers designed and developed by our company comprehensively adopting international advanced technology.
The circuit breaker has a rated insulation voltage up to 690V (500V for type 63), suitable for AC 50Hz or 60Hz, rated operating voltage up to 690V, and rated operating current from 6A to 1250A. It is used to distribute electrical energy and protect circuits and The power supply equipment is protected from damages such as overload, short circuit, under voltage and other faults. At the same time, it can also be used as the motor's infrequent starting and overload, short circuit, and undervoltage protection.
The circuit breaker has the characteristics of small size, high breaking, short arcing (or no arcing), etc., which is an ideal product for users. The circuit breaker is installed vertically (ie vertical installation) or horizontally (horizontal installation).
With isolation function.
In this series, the third-grade products with shell frame grades ranging from 63A to 225A also have a transparent cover, so that customers can observe the internal operation of the product at any time. This product complies with: National Standard GB14048.2.

Model and meaning

Working conditions
1. The upper limit of ambient air temperature is +40℃, the lower limit is -5℃, and the average value of 24h does not exceed +35℃.
2. Altitude: The altitude of the installation site does not exceed 2000m.
3. Relative humidity: the relative humidity of the atmosphere does not exceed 50% when the ambient air temperature is +40℃, and it can have a higher relative humidity at a lower temperature; the monthly average maximum relative humidity of the wettest month is 90%, and the The monthly average minimum temperature of the month is +25°C, taking into account the condensation on the surface of the product due to temperature changes.
4. Pollution degree: Pollution degree is 3

Main technical parameters
The rated value of the circuit breaker (see Table 1)

model	Rated current (A)	Number of poles	Rated insulation voltage (V)	Rated working voltage (V)	Arcing distance	Rated ultimate short-circuit breaking capacity (V) 400V/690V	Rated short-circuit breaking capacity (V) 400V/690V	Operating life		Use category
model	Rated current (A)	Number of poles	Rated insulation voltage (V)	Rated working voltage (V)	Arcing distance		Rated short-circuit breaking capacity (V) 400V/690V	load	No load	Use category
-63L	6,10,16,20,25, 32,40,50,63	3	500	380	≤50	25	18	1500	8500	A
-63M	6,10,16,20,25, 32,40,50,63	3,4	500		≤50	50	35
-100L	16,20,25, 32,40,50, 63,80,100	2,3	690		≤50	35	twenty two
-100M		2,3,4			≤50	50	35	1000	7000
-100H		3			≤50	85	50
-225L	100,125, 160,180, 200,000	2,3	690		≤50	35	twenty two
-225M		2,3,4			≤50	50	35	1000	4000
-225H		3			≤50	85	50
-400L	225,250, 315,350, 400	3,4	690		≤50	50	35
-400M		3,4			≤100	65	42
-400H		3			≤100	100	50
-630L	400, 500, 630	3,4	690		≤100	50	35
-630M		3,4			≤100	65	42
-630H		3			≤100	100	65
-800M	630,700, 800	3	690		≤100	75	50
-800H	630,700, 800	3	690		≤100	100	65
-1250M	10,001,250	3	690		≤100	100	75

The inverse time disconnection characteristics of the overcurrent release of the power distribution circuit breaker when all poles pass at the same time (see Table 2)

Serial number	Test current name	I	Appointment time	Starting state
1	Conventional non-trip current	1.05	2h(In>63A),1h(≤63A)	Cold state
2	Conventional trip current	1.3	2h(In>63A),1h(≤63A)	Immediately after the serial number 1 experiment started

Motor protection circuit breaker overcurrent release when each pole is energized at the same time inverse time disconnection characteristics (see Table 3)

Serial number	Set current	Appointment time	Starting state	Remarks
1	1.0In	≤2h	Cold state
2	1.2In	<2h	Immediately after the serial number 1 experiment started
3	1.5In	≤4min	Cold state	10≤In≤225
3	1.5In	≤8min	Cold state	225<In≤630
4	7.2In	4s≤T≤10s	Cold state	10≤In≤225
4	7.2In	6s≤T≤20s	Cold state	225<In≤630

The instantaneous action characteristic of the distribution circuit breaker is set to 10In±20%, and the instantaneous action characteristic of the circuit breaker for motor protection is set to 12In±20%

Outline and installation dimensions
ZUM1-63, 100, 225 outline and installation dimensions (front wiring) (see Table 4)

Note: The wiring terminal row of the internal accessories installed on the side of the circuit breaker is 17mm wide.

model
Outside -shaped feet inches		ZUM1 -63L	ZUM1 -63M	ZUM1 -100L	ZUM1-100M ZUM1-100H	ZUM1 -225L	ZUM1-225M ZUM1-225H
	C	85	85	87	87	111	102
	E	48	48	50.5	50.5	50.5	50.5
	F	twenty two	twenty two	twenty three	twenty two	twenty three	twenty two
	G	15	15	18	18	23.5	23.5
	G1	6.5	6.5	6.5	6.5	9	9
	H	72	82	68	87	86	103
	H1	90	96	85	104	109	125
	H2	18	27	twenty four	twenty four	twenty three	twenty three
	H3	4.5	4.5	4	4	5.5	5.5
	H4	7	7	7	7	5	5
	L	135	135	150	150	165	165
	L1	116	116	251	251	298	298
	L2	117	117	132	132	144	144
	W	76	76	91	91	105	105
	W1	25	25	30	30	35	35
	W2	-	102	-	121	-	141
	W3	-	-	-	65	-	74.5
Installation size	A	25	25	30	30	35	35
	B	117	117	129	129	126	126
	?d	3.5	3.5	4.5	4.5	5.5	5.5

ZUM1-400, 630, 800, 1250 shape and installation dimensions (front wiring) (see Table 5)

model
		ZUM1-400M /3P	ZUM1-400M /4P	ZUM1-630L/3P ZUM1-630M/3P ZUM1-400M/3P	ZUM1-630L/4P ZUM1-630M/4P	ZUM1-800M/4P ZUM1-800H/4P	ZUM1-400H /3P	ZUM1-1250M /3P
Outside -shaped feet inches	C	127.5	129	134	134.5	154.5	129	265.5
	C1	173.5	175	184	185.5	204	176	345.5
	E	88.5	88.5	88.5	88.5	105	88.5	97
	F	65	65	65	65	65.5	65	78
	?G	32.5	32.5	44	44	45	32.5	-
	G1	11	12	13.5	15.5	12.5	11	-
	H	105	103	113	112	108.5	108	141
	H1	153	155	158	158	146	154	202
	H2	37	37	41.5	42	32.5	36	58
	H3	6.5	6	6.5	6	4.5	5	16.5
	H4	4	3.5	3.5	3.5	4.5	5	2
	H5	5	4.5	4.5	4.5	8	4.5	4.5
	L	257	257	270	270	275	257	406
	L1	472	472	482	482	492	472	715
	L2	224	224	234	234	243	224	-
	W	150	-	182	-	210	148.5	210
	W1	48	48	58	58	70	48	70
	W2	-	196	-	238	-	-	-
	A	44	44	58	58	70	44	70
Installation size	A1	-	50	-	58	-	-	-
	B	194	194	200	200	243	194	375
	фd	7	7	7	7	7	7	10

Note: The total length of ZUM1-1250H (plus body connecting plate) is 545mm.

Ordering instructions
When ordering, users use the ordering code to place an order. The ordering code is composed as follows:
product model + internal accessory code (specify the rated working voltage for shunt and undervoltage) + do not write for power distribution, and add Z + electric operation for motor protection (P), Handle Z (no time writing) + internal accessory rated voltage code (no time, use 00).
For example, order ZUMl-100L, 50A, three-level, motor protection, shunt release (AC230V), electric operating mechanism (AC230V), and the number is 10 units. The order code is ZUM1-100/3310 (AC230V) ZP (AC230V).

Message Feedback

If you have any enquiry about quotation or cooperation,please free to email us ata65148373@163.comor use the following enquiry form,Our sales representative will contact you within 24 hous.thank you for your interest in our products.