ZUKCS-1A Capacitive contactless switch

Introduction

ZUKCS series reactive power compensation regulator is an electronic power device module that can quickly switch power shunt capacitors. Its electrical structure is mainly composed of high-power anti-parallel thyristor modules, isolation circuits, trigger circuits, and synchronous circuit protection circuits. It is composed of driving circuit, and is equipped with connecting terminals to control the switch on or off, and control logic voltage OV (off), 12V (on). This switch has the characteristics of simple installation, convenient maintenance, fast switching (dynamic response time 20ms), capacitors do not need to be discharged, switching without inrush current, noise-free operation, stable and reliable operation, and lack of phase protection. It is an ideal device for switching capacitor banks for reactive power dynamic compensation devices.

The main technical parameters

Rated voltage: 400V (230V)
Rated frequency: 50Hz
Control capacity: three-phase capacitor 1Kvar~80Kvar, single-phase capacitor 1Kvar~20Kvar

Conditions of Use

3.1 Ambient air temperature: -25℃~+50℃, and the average temperature within 24h is not higher than +35℃;
3.2 When the temperature is +25℃, the relative humidity can reach 100% in a short time;
3.3 The altitude does not exceed 2000m;
3.4 The installation place has clean air, no explosive and flammable hazardous materials; no gas that can damage insulation and corrode metals; no conductive dust; no rain and snow invasion and severe mold;
3.5 installation places where there is no obvious over-limit harmonic content.

Model Description

Shape and installation dimensions